Location: USA, FAYETTEVILLE ARKANSAS

Freestanding Metal A-Frame Wire Shelving racks.
These metal A-Frame shelves stand alone. NO screws required. Just use a rubber mallet to knock them together or disassemble them. About 50 sections available. Shelves are 4 ft long and 5ft 2in high. EACH section measures 4ft 2in from end of one frame to end of same frame. Sections link together to make short or long runs. The frames are designed to hold 6 shelves on each side. You get 12 shelves with each section you buy. You can hang 6 shelves on each side or you can leave shelves off one side and push it against a wall. If you choose to have shelves on only one side. . . against a wall, from base to end of where shelf sticks out at it's farthest point measures 21 inches. These were shelves used in a video store so the depth of each shelf is only about 6" deep. Just deep enough to hold about 6 or 7 DVDs. I have listed the web address so if you go to it and click on "coupons" you will see a photo of the A-frames.